Introduction
This rocket is a bit more difficult to make than the previous rockets (Rocket Science 101, Rocket Science 102). The turning requires a bit more care because the three engine pods need to be as close to identical as you can make them, but the real challenge is fitting the fins to both the rocket body and the engine pods.
Read the article by clicking on the links to the right.
Please note: Woodworking is an inherently dangerous activity. The non-woodworking techniques described here aren't all that safe, either. Sharp tools, powerful motors, big lumps of wood, chemicals, fumes, etc. can cause you serious bodily injury or even death. These pages are NOT meant as a substitute for instruction by a qualified teacher, just as an illustration of how I do certain things. I take no responsibility for any mishaps you may experience during a fit of inspiration. You've been warned.
All text and photos of "Rocket Science 103: Making a 3-engine rocket" are c. 2006, 2007 Johnna Y. Klukas, all rights reserved.
Page last updated 26 January 2007
